UHF Scanner RE40 – keyboard emulation BLE profile

Replaces BLUEBERRY HS UHF

  • RFID UHF reader and writer
  • Interfaces: Bluetooth 5.1, USB
  • Bluetooth profiles: keyboard emulation and serial emulation
  • Automatic reading of EPC and/or TID
  • Data format: HEX, ASCII or SGTIN-96 string with optional prefix and suffix
MAN/MACHINE INTERFACES 1 button for the RFID scan activation and for switch the device on/off
1 RGB multicolor LED (right one), 1 multitone beeper, 1 haptic actuator (vibration), to report the outcome of the RFID scan
1 RGB multicolor LED (left one) to report the operating status of the reader
INTERFACES Bluetooth 5.1 radio, USB Type C connector, 3.5mm jack connector
RFID ENGINE ZEBRA RE40 RFID UHF module
Air Interface Protocol: EPC Global UHF Class1 Gen2 / ISO 18000-63
Operating Frequency: 865- 928 MHz band for worldwide support
Regulatory and Compliance: EMI/RFI EN 55032:2012 / AC:2013 (Class B) EN 5032:2015 / AC:2016 (ClassB) EN 55024:2010 EN 5024:2010 / A1:2015 EN 55035:2017 47 CFR Part 15, Subpart B, Class B
RF Power: max 500mW / 27dBm worldwide, max 250mW / 24dBm Japan
Integrated antenna with linear polarization (or external antenna via SMA connector option available)
MAIN PROCESSOR Nordic Semiconductor nRF52833
WORKING TEMPERATURE -20°C / 60°C
OS COMPATIBILITY Android, iOS, Windows, macOS, Linux
POWER SUPPLY Integrated Li-Poly Battery 3.7V 1.2Ah, external 5Vdc from USB Type C connector
WORKING TEMPERATURE -20°C / 60°C
DIMENSIONS Height 116mm, Width 72mm, Depth 13mm
WEIGHT 93g
PROTECTION DEGREE IP54 (IP65 with accessories)

UHF Scanner RE40 is a powerful RFID reader, capable of reading UHF tags and transmitting the acquired data to any device equipped with a Bluetooth interface, including Android or iOS smartphones and tablets.

Taking advantage of the integrated linear polarization antenna, the maximum reading distance is around 4 meters depending on the FF-type UHF tags used. Since it is a loop antenna, the reading of miniaturized NF-type UHF tags is also facilitated.

As an alternative to the integrated antenna, to achieve greater reading distances or to be used in special applications, it is possible to connect one external antenna to the UHF Scanner RE40 via an optional SMA connector.

The use of the reader is easy and intuitive, thanks to the presence of a single button to activate the reading of UHF tags, combined with a multicolored RGB LED, a multitone beeper and a haptic actuator (vibration) that informs the operator about the result of the reading.

UHF Scanner RE40 integrates Bluetooth 5.1 radio transmission technology. There are two profiles available: keyboard emulation and serial emulation. In keyboard emulation, the reader is able to transmit the data read by the UHF tags to any pre-existing application, in any keyboard data input field. In serial emulation, through specially developed applications, the reader is able to perform any reading or writing operation on UHF tags (TT-RFID protocol or API for Android or iOS are available to developers).

UHF Scanner RE40, during its normal use, works on battery power. Charging takes place via a USB Type C connector, making the reader compatible with all latest generation battery chargers.

Thanks to its exclusive 3.5mm jack input, the same as that of smartphones, it is possible to connect the reader to a common selfie stick, so as to make reading UHF tags ergonomic even in difficult or uncomfortable positions to reach with the reader held in hand.

From our blog

TERTIUM Technology prerogative 1

UDI system and RFID technology