GreenSensing PT100
GreenSensing PT100 is a ZeroPowerWireless transponder devoted to PT100 temperature probes’ readout.
The device is also suitable for digital temperature probes readout (based on AD7301 or AD7414) and, more broadly, for analog and digital output transducers’ readout.
GreenSensing PT100 has no on-board battery and only activates when stimulated by the reader. Its function is to acquire the data from the temperature probe and continuously transmit it by radio to the reader while supplied.
For more information and technical specifications, a product brochure can be downloaded.
GreenSensing R420/R232
GreenSensing R420/R232 is a ZeroPowerWireless reader that can be powered by a 12VDC or a 24VDC source and makes the information gathered from the transponders available on its output by either a 4-20mA analogue output or a RS-232 interface.
The device can also be powered from, and interfaced to, a PC by PS2 or USB port.
For more information and technical specifications, a product brochure can be downloaded.
GreenSensing PT100 and R420/R232 systems
GreenSensing PT100 and R420/R232 systems allow for the readout of a PT100 temperature probe without the requirement for a physical connection between the probe and the measurement system, they are thus particularly suitable to read the temperature from moving part of a piece of equipment.
As well, they are useful to acquire the temperature, but also other physical of chemical quantities, in difficult or unusual scenarios, for example from within walls, from closed and isolated environments, from several test points scattered on the territory.
The absence of batteries on board of the transponder, makes Greensensing devices very interesting and innovative compared to other solutions on the market, for two reasons:
- They are virtually maintenance-free
- They are easily recyclable and environment-friendly